|
|
|
$1944.00 F-3100 63" Cutting Capacity
Fletcher-Terry Rebate Click here When purchasing any of these cutters don't forget to buy extra blades. The cutters come with some blades (usually 5), however, now is the time to buy them because framingsupplies.com always has the right price and they will be packaged with your order ~ saving you additional shipping cost. |
|
|
|
 Pillar post for
cutting Gatorboard, foam board, or mat board up to 1/2" (12mm) thick. Ten Fletcher
utility blades are included with the machine. |
|
 The Pillar post for
scoring glass uses a Fletcher 120° hardened tool steel wheel in a unit which can be
readily removed and replaced when worn. Glass up to 1/4" (6mm) thick can be scored
and broken out on the Fletcher 3100. Ten replacement wheels are included with the machine. |
|
 This pillar post is
used for scoring acrylic plastics and other similar "fracture" sensitive
materials. Such materials up to 1/4" (6mm) thick can be scored and broken out on the
Fletcher 3100. Ten replacement blades are included with the machine. |
|
 The pillar post for
cutting hardboard (un-tempered masonite) up to 3/32" (3mm) thick uses two razor sharp
tool steel wheels that cut from the front and the back simultaneously. One set of wheels
is included with the machine. |
|
 The
pillar post for cutting aluminum sheet up to .040" thick is an optional feature of the machine.
Like the hardboard cutter, it utilizes two sharpened tool steel wheels that cut both from
the front and back at the same time. |
|
| FEATURES: | |
Fletcher 3100 Multi-Material
Cutter
Easy-Install Interchangeable Pillar Posts
Minimal assembly and mounts easily to the wall to save space. |
|
Cutting capacity of 63" (1600mm) The cutting head
assembly glides along chrome plated steel tubes on composite sleeve bearings that reduce
friction and produce smooth, accurate scoring and cutting. |
|
Break-out plastic right on the machine, all in one operation, using the Fletcher patented
break-out feature. |
|
Full length, non-slip clamp firmly holds material being cut. |
|
Left and right side supports assure squareness and accuracy. Scales permit setting the
dimension on either the left or right side. |
|
The
measuring stop included with the machine makes quick work of cutting materials to the same
dimension. |
|
Instruction Video
(VHS, PAL, or SECAM) and instruction Manual included. |
|
Two year warranty |
The Fletcher F-3100 is shipped Motor Freight Only
Please give us a call we will get the best motor freight shipping cost to your location ~ 800-334-9060 |
| Sample Costs for F-3100 Motor Freight charges . . . | |||
| From | To | Approximate
Motor Freight Cost
(Commercial Location) |
Approximate Motor Freight Cost (Residential Location)
|
| North Carolina | Miami,Florida | $67.43 | $117.43 |
| North Carolina | Houston,Texas | 64.45 | $115.45 |
| North Carolina | Denver, Co | $123.76 | $173.76 |
| North Carolina | Los Angeles,Ca | $127.73 | $182.73 |
Also consider the Onyx 90
The Fletcher F-3100 is shipped Motor Freight Only
| STOCK NO. | List Price |
framingsupplies.com Price |
DESCRIPTION | |
|---|---|---|---|---|
| FL-04-715 | $3297.95 | $1944.00 | F-3100 63" (1600mm) Cutting
Capacity
|
|
| FL-04-114 | $62.45 | $35.95 | F-3100 Measuring Stop One is included with F3100 |
|
| F-3100 REPLACEMENT BLADES AND WHEELS | ||||
| FL-02-120 | $62.25Pkg /10 | $35.95 Pkg /10 | Steel 120° Cutting Wheel Unit | |
| FL-03-126 | $29.75each | $17.15 each | Carbide 124° Cutting Wheel Unit | |
| FL-05-712 | $56.55Pkg/10 | $32.55Pkg/10 | Plastic Cutting Blades | |
| FL-05-004 | $68.60 | $39.25Pkg/100 | Mat Cutting Blades (100 blades per box) | |
