~ We will not be undersold ~


No Voice Mail ~ Real Humans 



Home   Index   Suggestions   Join our Mailing List

Sign Equipment






The Inmes IM-4P Special

Price $3299.00 List price $3,700.00

What makes this machine great? 

Glad you asked.  Ease of use.  When joining frames, that is to say placing the v-nails into the back of the frame, it is very important that the frame is supported during the inserting of the v-nail.  If you have ever tried to hammer a nail into a board that is not supported properly you know how difficult it can be - because the wood will try to spring away from the force that is being applied.  With the IM-4P when you move the "joy stick" it positions both the nail driving head (below the wood) and the vertical support clamp (above the wood) at the same time.  This eliminates the necessity of readjusting the vertical clamp every time you place a v-nail in a different location.



Changing the v-nails is easy... you don't have to change driving heads or put in any compensators... just remove the v-nails that are loaded... change the selector to the desired v-nail size and place the new size v-nails in the machine.  PRESTO

Im4P Manual

Change the v-nail sizes with a turn of a lever - 5,7,10,12,15
Comes with heavy duty tilting stand.
Horizontal clamp holds frames up to 5 inch wide!
Optional support wings
The work platform (machine top) is much bigger than other under pinners
Stacks v-nail effortlessly
Large machine leveling screws
Pneumatic regulated control of vertical & horizontal clamps
Comes with main air regulator, water separator, and system oilier
1 year warranty

Inmes Im4P

The IM-4P & framingsupplies is rolling over the competition


The IM-4P comes well packaged in a wooden create.  The IM-4P ships motor freight.  Total weight is less than 130 pounds.


This machine can be operated from the front (in the flat position) or from the back (inclined). Shown here with optional wings.



When you buy a top quality under pinner... remember it will last more than 20 years.  Look at what it will cost to feed it for the next twenty years... in-other words the cost of the v-nails.  Inmes' v-nails are 1/2 to 1/3 the cost of many of the competitors.   That means that if you buy one with expensive v-nails you will probably be paying the purchase price 2 or 3 times.



The stick type for IM-3P/SE, IM-4P & IM-5P underpinners.

6 boxes less 5%, 12 boxes less 10%



Quantity Price
(5mm)    3/16" 6,000/box $12.79

(7mm)    1/4"



(10mm)   3/8" 



(12mm)   1/2"



(15mm)   5/8"





INMES manufactures wedges for its under pinned.  For joining picture frame of woods of medium-hard and hard (Ex. MDF) , in standard sizes. The entire line of INMES wedges for under pinned. machines should use original INMES wedges, to guarantee proper functioning and best performance by the wedges.


Optional accessories: Hexagonal, octagonal.


$9.95 Hexagonal

$9.95 Octagonal


Low profile and stable.   Excellent for around the frame shop.  Can be used for under pinned., air guns, and even fill your truck tires.   Includes pressure switch on @ 80 PSI and pressure switch unloaders @ 115 PSI.

bullet Motor:115V, 60 Hz, 3450 RPM
bullet Air delivery:

5.2 SCFM @ 40 PSI
4.2 SCFM @ 90 PSI

bullet 125 PSI maximum recommended pressure
bullet Oil lubrication


 Air Compressor Price $139.95


For top performance in all temperatures, this industrial quality air hose stands alone! Made of seem less rubber reinforced with high tensile nylon cord, this hose delivers long lasting dependability. Can be used for all lines, air tools and accessories.


bullet All weather, high flexibility hose
bullet 3/8" X 25 feet
bullet Oil, abrasion, and weather resistant
bullet 1/4'' NPT fittings
bullet 200 PSI working pressure
bullet List Price $17.95

 Price $12.95


Send mail to with questions or comments about this web site.  Copyright 1998 / 2015