|
|
VNails® "Pulling Power" Nail
|
HPT = Hardwood power twist nails (Good for medium and hardwood) HDF = Medium density fiber board (Good for medium density fiber board) |
Miter-Mite V Nails |
Price |
|
|
|
5 mm 3/16" IT-1005 5000 / box |
HPT |
Price $48.65
|
|
7mm
1/4"
IT-1007 4000 / box |
HPT
|
Price $31.47
|
|
10mm 3/8"
IT-1010 3000 / box |
HPT
|
Price $25.88
|
|
12 mm 1/2" IT-1012 3000 / box
|
HPT
|
Price $28.98
|
|
15 mm 5/8"
IT-1015 2000 / box |
HPT
|
Price $20.70
|
|
mdf = |
For | Medium Density Fiber board | |
10mm 3/8"
IT-1010 2400 / box |
HDF |
Price $24.15
|
|
12mm 1/2"
IT-1012 2400 / box |
HDF
|
Price $25.51
|
|
15mm 5/8"
IT-1015 1600 / box |
HDF |
Price $18.22
|
|
Tabs for the |
Tab Point Tool | ||
Tab
Point Fasteners 12,000 per box |
$62.11 per box
$5.18 per M
|
|
Guide For V Nail Selection
| Type of Molding | VNail Recommended |
| Soft wood: Banak, Bass, Cedar, Cellular Polystyrene, MDF, (Vertical Grain), Northern White Pine, Obeche, Polystyrene, Poplar. | "Pulling Power" V Nails 1007sw, 1010SW, 1012SW,
1015SW.
"Straight" V Nails: 1107vg, 1110vg. |
| Medium Wood: Cedar, Cherry, MDF (Vertical Grain), Maple, PVC, Polystyrene, Poplar, Ramin, Red Oak, Southern Yellow Pine. | "Pulling Power" V Nails: 1005HPT, 1007HPT, 1010HPT, 1012 HPT, 1015HPT. |
| Hard Wood: Ash, Cherry, Hickory, MDF (Horizontal Grain), Maple, Pecan, Ramin, Red Oak, White Oak. | "Pulling Power" V Nails: 1007HPT, 1010HPT 1012HPT, 1015HPT. |
| MDF (Medium Density Fiberboard): Horizontal Grain MDF. | Pulling Power" HDF V Nails: 1010HDF, 1012HDF, 1015HDF. |